Touch System Replacement
Read over these instructions in full before beginning. Your system styling may differ from what is depicted. If you have any questions, contact support before beginning.
Your replacement will not function until a HandyTrac technician loads the database and updates the account. You must contact HandyTrac to complete this process.
service@handytrac.com or call 1-888-458-9994.
Monday - Friday, 8AM - 6PM EST
Old electronic keypad must be returned. DO NOT THROW AWAY.
Removing Old Hardware
Disconnecting Cables
Power off using the power switch at the bottom-right. Unplug power cable from the wall.
Pull lock, light, and switch connectors out of the control box to access the connectors.
Disconnect all cables going to the cabinet(s).
This sketch cannot currently be displayed in exports
Unscrew the old touch keypad and control box from the wall.
Installing New Hardware
Mount the HandyTrac Touch
This sketch cannot currently be displayed in exports
Gently feed the electronic lock cables through the electronic lock cable port on the right side of the key cabinet. Make sure all three cables are in good condition.
Fasten the keypad to the wall with your mounting hardware.
This sketch cannot currently be displayed in exports
Connect the electronic lock, light, and switch connectors inside the key cabinet. The ends of each connector are labeled.
Push extra cable lengths inside the main Touch console and snap the cables into the retaining clips on the inside of the cabinet. This prevents contact with the key panels during operation and protects the cables.
Call HandyTrac Technical support to swap your account to the new system. 1-888-458-9994.
Old keypad and control box must be returned. DO NOT THROW AWAY.